-
Check Device and Software:
- Ensure you have a valid Wi-Fi or Ethernet connection.
- Verify that Windows 1 or 11 is installed.
- Confirm that Windows Subsystem for Linux is installed and updated.
- Check that the latest version of Surfshark VPN is installed.
-
Install the Required Driver:
- Visit the official Surfshark VPN website and download the driver for Windows.
- Download the driver and insert it into your computer.
-
Install the Surfshark VPN Software:
- Download the installer from the official website.
- Extract the installer file and locate the 'Surfshark VPN' file.
- Right-click the installer and select "Extract All." Follow the on-screen instructions to install the software.
-
Set Up the VPN Router:
- Locate the Surfshark VPN router on your network.
- Right-click the router and select "Configure" to access the router settings.
- Go to "Network" settings and set the IP address and password for the VPN service.
-
Configure the VPN Service:
- In the router's configuration, select "Create VPN Service" and choose "Surfshark VPN."
- Enter the correct address and password in the provided fields.
-
Enable the VPN Service:
- Navigate to "Network" in the router's settings.
- Click on "Create VPN Service" again and ensure the service is enabled.
-
Enable the VPN Client:
- Create a username and password for the VPN client.
- Log into the VPN client using the username and password you created.
-
Test the VPN Service:
- Open a website you regularly use.
- Ensure messages are being delivered and that the VPN service is working correctly.
-
Troubleshooting:
- If issues occur, check the router's logs for errors.
- Ensure the driver and software are up to date.
- Verify that the VPN service is enabled and the correct address/password are entered.
By following these steps methodically, you should successfully set up the Surfshark VPN Router on your Windows machine.
